New 4K HDCP 2.2 Upgrade for Splitter and Express Switchers

29-09-2017

 

 

Value-added 4K HDCP 2.2 HDMI distribution for value-focused HDMI Switching and Splitting

WyreStorm's no-nonsense Express line of 3x1 and 5x1 HDMI Switchers get a 4K UHD upgrade and their new 1x2 splitter joins the party supporting 4K UHD with HDR, with all three HDCP 2.2 compliant for compatibility with the latest content and sources.

 

 

Small Splitter Offering the Big Picture.

 

Small is beautiful, but when it comes to video resolution bigger is always better.

 

Luckily, WyreStorm’s new SP-0102-H2 HDMI splitter offers the convenience of single source to dual output for small-scale local AV distributions, combined with full 18Gbps HDMI supporting video resolutions up to 4096x2160@60Hz 8bit 4:2:0 and 4:4:4, as well as HDR 10bit @24Hz.

 

Of course, being HDCP 2.2 compliant and supporting multichannel audio up to DTX-X and Dolby Atmos lets you get the most from the latest 4K content and source devices.

 

The compact design of the SP-0102-H2 offers reliable plug-and-play duplication of an 18Gbps 4K HDR signal to an additional screen or AVR with a delightfully small footprint for a solution that might be small in stature but as big on value as it is on AV quality.

 

SP-0102-H2 at a glance:

 

  • Splits a single 4K UHD source to two 4K UHD displays via HDMI
  • Supports 4K@60Hz 8bit 4:2:0 | 4:4:4 and HDR@24Hz 10bit BT.2020
  • 1080p@60hz 48bit
  • HDCP 2.2 encryption
  • DTS-X and Dolby Atmos supported
  • Compact design with plug and play set up for easy installation

 

 

 

Express Switchers Go 4K!

 

WyreStorm's EXP-SW-0301 and EXP-SW-0501 HDMI Switchers get a shot of 4K adrenaline and face lift! Both models now support the quick and easy local connection and switching of three or five 4K UHD or 1080p HDMI sources respectively to a single 4K UHD or HD display device, with the 0501 offering auto-switching for added options.

 

Multichannel audio is of course still supported up to DTS-HD and Dolby TrueHD and you can still switch sources from the front panel or the IR remote handset included, but models now handle 4K@60hz HDCP 2.2 with pixel subsampling rates of 4:2:0, allowing you to make the most of the latest AV content.

 

What’s more, with units drawing power passively from HDMI cables, you can kiss goodbye to your mains connection and hello to reliable, value-focused plug-and-play switched distribution of your favorite 4K content right to your screen in all its uncompressed glory.

 

EXP-SW-0301 and EXP-SW-0501 at a glance:

 

  • Connect and switch three or five 4K or 1080p HDMI devices to a single HDMI input on a TV
  • Auto-switching featured on EXP-SW-0501
  • Switch between any sources at the same time
  • Supports 4K resolutions up to 4096x2160 @60Hz 4:2:0 8bit to 7m/23ft
  • Supports HD resolutions up to 1920x1200p @60Hz 8bit to 15m/49ft
  • 2ch PCM | Dolby Digital True HD | DTS-HD Master Audio
  • Simple plug-and-play connection with push button or remote operation
  • Passive operation - no PSU required to power unit
  • HDCP 2.2 support

 

 

 

Your ... Distributor